The worst thing that you can find in your newly built home is mold, but it is something that is built into homes these days by careless contractors bent on getting the job done with as little effort as possible on their part. As the employer of the contractor, it is your responsibility and in your best interests to be at the job site on a regular basis to ensure that the building materials that your contractor purchased to build your home with are both up to your standards and that they are handled correctly.
Your contractor should have purchased only the materials that you outlined in your contract with him or her to purchase. They should have purchased nothing more and nothing less. None of these materials, especially drywall, should be stored directly upon the ground where it comes into contact with the soil. They should be stored on tarps or raised up off the ground in some way. This will help ensure that mold does not start to grow on them before they are used in the construction of the house.
The building site should also be covered with tarps before it rains until the roof and walls are put up to protect the interior of the structure.
Before you hired your contractor, you should have obtained references from him or her to determine the quality of their craftsmanship. This is something that you should do when hiring anyone to do almost anything for you concerning an investment such as this. You should ask the references whether they have had any problems with mold or water damage since their home was built and if it was due to bad construction or not. As long as your contractor is known for good building practices, you should have no problem with the way that he treats the building materials for your house.
It is unfortunate that you cannot be at the site of your home’s new construction all the time, but the more you are able to check on the progress of your home’s construction, the better. You should have a mold inspector come and inspect the property at least twice, once during the middle of the construction and again once it is completed to determine that there is no mold growing in the home.
Jim Corkern is a writer and promoter of quality
Connecticut Mold Remediation services and other states such as
north carolina mold remediation companies across the united states.
Saturday, September 29, 2007
Home Building Contractors
Having a home built for you is a tricky procedure, especially since there are so many different factors to consider. The first thing that you need to think of, though, is just who you will hire to do this task for you. There are a large number of contractors out there that would love to do the job, but the fact is that not all of them are honest or completely up to the task of making sure it gets done correctly. Many contractors have been known to use poor quality materials, even if they are up to local building code standards. They may end up causing damage to your home, but you cannot do anything about it as long as the materials the contractor used are up to local structural codes.
When choosing a contractor, you should talk to people that you know and trust first to find out if they can recommend anyone for the job. Only after you have exhausted these resources should you look to the local phone book. No matter which method you use, you should obtain at least three different references from at least three different contractors so you will have some options. Contact each of the references and ask if the newly built home has had any problems with mold or water damage since the construction was finished. Other structural problems should also be asked about.
After you have gotten a few different contractors to choose from that you find to be reputable, ask each one of them for a fixed price bid based on the building plan that you give to them and what materials you want the home built out of. They may try to get you to accept a time and materials contract, but this can be tricky, since time and materials contract allow the price to vary depending on different factors such as the cost of labor and building materials. They may quote you a low price in the beginning, but it can quickly rise as unexpected issues come up with the building process.
The contract with your contractor should be very specific as to what is covered in it. It should include the date that the project will begin and a date by which it should be finished and also include what specific building materials you wish for the home to be built out of so that your contractor does not have much room to substitute other, lesser materials.
Jim Corkern is a writer and promoter of quality
Connecticut Mold Remediation services and other states such as
north carolina mold remediation companies across the united states.
When choosing a contractor, you should talk to people that you know and trust first to find out if they can recommend anyone for the job. Only after you have exhausted these resources should you look to the local phone book. No matter which method you use, you should obtain at least three different references from at least three different contractors so you will have some options. Contact each of the references and ask if the newly built home has had any problems with mold or water damage since the construction was finished. Other structural problems should also be asked about.
After you have gotten a few different contractors to choose from that you find to be reputable, ask each one of them for a fixed price bid based on the building plan that you give to them and what materials you want the home built out of. They may try to get you to accept a time and materials contract, but this can be tricky, since time and materials contract allow the price to vary depending on different factors such as the cost of labor and building materials. They may quote you a low price in the beginning, but it can quickly rise as unexpected issues come up with the building process.
The contract with your contractor should be very specific as to what is covered in it. It should include the date that the project will begin and a date by which it should be finished and also include what specific building materials you wish for the home to be built out of so that your contractor does not have much room to substitute other, lesser materials.
Jim Corkern is a writer and promoter of quality
Connecticut Mold Remediation services and other states such as
north carolina mold remediation companies across the united states.
Getting the Right Contractor
There are a number of factors that you need to consider when hiring a contractor to build your new home and the process of finding the right one can be somewhat tricky. While you may think that hiring a contractor is a few simple steps, but a lot of it can be attributed to your own intuition.
Talk to your relatives and friends and find out if they can recommend a good contractor to you. This is the most reliable way to do find a contractor to build your house, but if you do not have anyone that you can talk to or they cannot recommend anyone, then you should try the phone book. The general consensus is to never use the phone book to hire people to work on your home, but not all of us have the friends or relatives that can give us advice on who to choose.
Get in touch with a few different contractors and ask for at least three references from each one and contact them all. Ask if they have had any issues with water damage or mold in their newly constructed home and ask about other structural problems that might exist. Write down what you discover about each contractor and use this to make a decision on who to offer the job. Get a fixed price bid from the ones you think are good enough for the job and make sure they get the same building plan.
Your contract with them should have a number of specifics in it so that there is no room for confusion as to what is expected of your contractor. Dates showing where the project should begin and approximately when it should end are to be included along with a list of materials the home will be built out of. Consider offering incentives to your contractor if the job is completed early and offer penalties if the job is not completed by a certain date if moving in as soon as possible is important to you.
Any contractor that you hire should have the proper insurance for himself and his workers so workers are covered by his insurance while they are working on your property. You need to obtain copies of all these insurance policies and keep them in a job folder along with other necessary documents like your building contract and a payment schedule.
You should make payments to your contractor as work progresses and do not let your payments get ahead of the work that has been done.
Jim Corkern is a writer and respected contributor to the Water damage restoration and mold remediation Industry. Visit his sites for more information.
http://www.moldrestorationny.info
http://www.moldrestorationnj.info
Talk to your relatives and friends and find out if they can recommend a good contractor to you. This is the most reliable way to do find a contractor to build your house, but if you do not have anyone that you can talk to or they cannot recommend anyone, then you should try the phone book. The general consensus is to never use the phone book to hire people to work on your home, but not all of us have the friends or relatives that can give us advice on who to choose.
Get in touch with a few different contractors and ask for at least three references from each one and contact them all. Ask if they have had any issues with water damage or mold in their newly constructed home and ask about other structural problems that might exist. Write down what you discover about each contractor and use this to make a decision on who to offer the job. Get a fixed price bid from the ones you think are good enough for the job and make sure they get the same building plan.
Your contract with them should have a number of specifics in it so that there is no room for confusion as to what is expected of your contractor. Dates showing where the project should begin and approximately when it should end are to be included along with a list of materials the home will be built out of. Consider offering incentives to your contractor if the job is completed early and offer penalties if the job is not completed by a certain date if moving in as soon as possible is important to you.
Any contractor that you hire should have the proper insurance for himself and his workers so workers are covered by his insurance while they are working on your property. You need to obtain copies of all these insurance policies and keep them in a job folder along with other necessary documents like your building contract and a payment schedule.
You should make payments to your contractor as work progresses and do not let your payments get ahead of the work that has been done.
Jim Corkern is a writer and respected contributor to the Water damage restoration and mold remediation Industry. Visit his sites for more information.
http://www.moldrestorationny.info
http://www.moldrestorationnj.info
Subscribe to:
Posts (Atom)
